Ed's design incorporates a fully elliptical wing shape on both the leading and trailing edges, and a foam fuse. See building notes below. 

Specs:  O.S. 25FX with mousse can muffler.
Wing span: 40.5"
Length: 32.5
Weight: ?? - under 3lbs..
Paint -  Lusterkote and Krylon with Lusterkote clear.  vinyl & Major Decals.

Made from 10% enlarged Gus Morfis plans.   Fuse is blue foam & fiberglass with fiberglass rod reinforcement.  Cowl is Fiberglass.  The wing is Coroplast - the curved leading edge was achieved by stitching the leading edge shut first, and then inserting the spar, and then sealing the
trailing edge shut.  Finished off with a 3/16 balsa leading edge cap strip and sanded to shape.  

For much more information and help regarding RC combat, I recommend that you go to the home page of the AMA SIG, the RC Combat Association.
There you will find  a world of help and information, from a growing group of friendly combat pilots.

Want to split Flagging Tape in half length wise?
Then look here!